O2 Sensor Eliminator Adapter Oxygen Sensor Simulator Extender Catalytic Converter CEL Spacer with Mini CAT
O2 Sensor Eliminator Adapter Oxygen Sensor Simulator Extender Catalytic Converter CEL Spacer with Mini CAT
Couldn't load pickup availability
Why do you need to replace the oxygen sensor?
1.A worn-out oxygen sensor can cause excessive gasoline consumption, elevated exhaust emissions, accelerated catalytic converter damage failures, and cause engine performance problems.
2.If your state has vehicle inspection programs to regulate emissions, a faulty CEL, and O2 light will not allow you to pass the inspection.
3.A practical solution to solve the problem of P0420/P0042/P0430 fault codes.
Features:
1: The O2 CEL fixture actually incorporates the M18X1.5 miniature catalytic converter,which helps to get rid of the modified exhaust or the inspection engine light after removing the catalytic converter.
2: Made of Zinc Plated Steel which is durable and have high strength to use.
3: AVOID A CHECK ENGINE LIGHT,Catalytic converter built inside and will help get rid of that annoying check engine light.
4: If the O2 sensor is too sensitive, the CEL will still open after loading the canceller, and all problems on the CEL alarm will not be resolved.
5: Easy installation, direct bolt-on, no modification needed.
Product parameters:
Condition: 100% Brand New
Material: SS304+ stainless steel filter
Color: Please refer to the picture
Type: Oxygen Sensor
Fitment Type: Direct Replacement
Thread: M18 X 1.5
Fitment:
Universal All models
Package list:
1 x Sensor (As choosen)
Share
I would recommend them to others.
The O2 sensor spacer arrived in a durable plastic case with foam cushioning to prevent any damage.
Don't have to worry or see the annoying light. Will buy again.
Works well
Works and fit as it should.










Let customers speak for us
from 2842 reviews
Installation was straightforward, and the precise fit to American specifications was noticeable. Transmission performance has significantly improved, with smoother shifts and no issues. Very satisfied with the product's quality and compatibility.

My truck was accelerating really slow, likely stuck in third. Replaced the transmission fluid, filter, gasket, and the four solenoids (just one of this specific item) and its running like brand new! Pretty straightforward replacement. There are a few videos on Youtube. Just have to be careful removing the two solenoids on the driver's side since they are spring loaded and will come flying off once you remove the clip holding them in place. Apply some pressure with your thumb or finger to keep it in place while removing the clip and then slowly pull them out so you don't lose the valves inside the transmission channel.

Chevy dealership wanted twice the price. This product works just as great and it comes like if I bought it from the Chevy dealership.

Worked great fit perfect

This product was exactly as described in the add.
The packaging was excellent. Lots of care went into this so nothing was damaged.
Great job 10/10 definitely recommend buying from them.

Packaged with care, arrived intact. Handles 30A load without issues. Great value for money!

Knowledgeable support team helped me compare OEM vs aftermarket options. The mirrors' aerodynamic shape matches the 929RR's lines beautifully. Top quality!

This big bore kit transformed my TRX400EX! The 89mm cylinder shows perfect machining marks and the piston rings seat beautifully. Noticeable power gain across all RPMs.

Installed in 10 minutes with basic tools. The gasket compresses evenly without tearing. Solved my intermittent charging problem completely.

This belt performs better than OEM on my Backcountry 850! Withstands deep powder riding without slipping. The reinforced fibers show no wear after 300 miles.

Safety Upgrade with a Super Easy Install. We always use the appropriate hand signals when riding in groups of 2 or more, but the added brake lights as well as turn signals are much appreciated by those riding behind me as I lead our groups more than most. I read the negatives comments about the adhesive, so I peeled the adhesive backing off, heated it with my heat gun and even heated the saddle bag a bit before mounting the lights and although it's early, it's been nasty hot, and the adhesive seems to be holding just fine!
The colors are a perfect match for the factory lighting on my bike!

Plug and play as advertised. This thing is awesome for the price!! Bike fired right up. No tuning or adjusting needed. I am very happy with it!!

Stator is well made and has put out consistent voltage.

Excellent parts, at a very good price

Installed flawlessly in my modified Charger. The 525LPH rating is accurate with consistent pressure under WOT. Anodized fittings resist corrosion better than stock components.