2015-2017 Yamaha YZF-R25 Generator Stator 1WD-H1410-00+Regulator Rectifier 1WD-H1960-00+Gasket Cover
2015-2017 Yamaha YZF-R25 Generator Stator 1WD-H1410-00+Regulator Rectifier 1WD-H1960-00+Gasket Cover
SKU:Moto550-C431~1
Couldn't load pickup availability
Features:
Kit include Stator, Regulator Rectifier and gasket.
Meet or exceeds the OEM quality, direct replacement to your original unit.
Perfect fit and ready to install.
Always use a sealant to mount the cable gland joint.
Instruction is NOT included.
Specifications:
Condition: Aftermarket 100% Brand New
Type: Stator and Regulator Kit
other specification:
Stator
Number of plugs: 2
Number of wires: 5
Number of pins: 2 + 3
Number of poles: 18
Pick up pulsar coil included.
Regulator
Number of plugs: 1
Number of pins: 5
Replacement Part Number:
Stator Assy: 1WD-H1410-00, 1WD-H1410-01
Rectifier, regulator: 1WD-H1960-00
Gasket, magneto cover: 1WD-E5451-00
Fits Make/Model/Year:
Fit for Yamaha YZF R25 YZF-R25 2015-2017
Fit for Yamaha YZF R25A YZF-R25 ABS 2015-2017
Fit for Yamaha YZF R3 YZF-R3 2015-2018
Fit for Yamaha YZF R3A YZF-R3 ABS 2015-2018
Fit for Yamaha MTN250 MT-25 2015-2016
Fit for Yamaha MTN320 MT-03 2016-2017
Fit for Yamaha MTN320-A MT-03 (ABS) 2016-2018
Package Includes:
1 x Generator Stator
1 x Voltage Regulator
1 x Crankcase Gasket
Note:
Before installing your new stator regulator rectifier;
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors.
Our stator / regulator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
You will get exactly what you see in pictures, if in doubt do not hesitate to compare our item to your original part.
The product on offer is an accessory or spare part and thus is not an original product of the vehicle manufacturer.
The name of the vehicle manufacturer is stated only as an indication of the determination of the product being offered as an accessory or spare part, to clarify, for which vehicle the product on offer fits.
Shipping:
Free Shipping
Handling?time: Ship within 24 hours
Delivery Time: 3-7 business days
Warranty:
1. Condition: 100% Brand New
2. Warranty Period: 1 Years
3. 24-Hour Support: Provide you with timely after-sale support
Let customers speak for us
Fits perfect 👌
It fits, no instructions on how to install emblem but I made it work, looks awesome.
Rather than have to swap out badges where I wanted the red 'SRT" on my black spoiler for the 2015 Dodge Challenger, I found these overlays and they worked out great. Easy to apply, stands out and helps to provide that little bit of customization I wanted
I used this to replace the DC outlet in my 2021 JLU sport. It will fit. I had to remove the controls to the heat/air. Then remove the dash cover below it. Disconnect some wiring harnesses.
Look good on it. Nice gloss to it. Made just right
Good quality, appearance is amazing!
Product arrived after quite some time, overall well packaged and without defects, but took too long to arrive.
Looks great! Fits without any problems 👍🏼 Shipping took a bit long but I'm satisfied with the result. There was a holder for the Audi logo, but unfortunately I didn't figure out how to use it properly. So I simply tied the logo with cable ties. Therefore, I would definitely recommend it!
This Walbro 525lph fuel pump and kit is incredible. The E85 compatibility is fantastic, and it dropped right into my Hellcat. Huge improvement in fuel delivery and peace of mind. Perfect for high-performance builds.
This master solenoid kit completely revived my 4L60E transmission. The shifts are now crisp and firm, solving all the previous hesitation and slipping issues. A high-quality, essential fix.
This CarPlay upgrade module for my F-250 was a perfect plug-and-play solution. It works flawlessly with Sync 3, and now I have seamless Apple CarPlay. It makes the truck's tech feel completely modern. Fantastic upgrade!
This steering angle sensor was the exact match for my Pathfinder. Installation was simple and it cleared my dashboard warning lights immediately. Great OEM-quality replacement part!
This carburetor was the perfect fit for my Honda Twister. The bike starts easily and idles smoothly again, with much better throttle response. A fantastic fix that got my motorcycle running like new.
This center support bearing was a direct replacement for my Durango. The annoying vibration and noise are completely gone now. Quality part, easy install, and the ride is smooth again. Highly recommend.
This SRT grille emblem looks factory-perfect. The adhesive is strong and the finish matches the OEM gloss black perfectly. Installation took minutes and it completes the front end. Excellent quality.