Tent Camper Crank Handle For Coleman/Fleetwood Pop-up Campers Round Mouth
Tent Camper Crank Handle For Coleman/Fleetwood Pop-up Campers Round Mouth
SKU:N002RV-A033
Couldn't load pickup availability
Handle Length: 4-1/4 inches
End of Handle to Elbow: 8 inches
Elbow to Socket End: 8-1/4 inches
Outer Diameter of Socket: 7/8 inch
Inner Diameter of Socket: 5/8 inch
Shipping Information:
Free Quick Shipping to USA.
Estimated Time of Arrival: within 3-8 working days.
Share
Fixed my RV fridge in 15 minutes! After following online troubleshooting guides, I diagnosed a bad circuit board. This Dometic power supply module was a perfect OEM replacement. The swap took less than 15 minutes and now my refrigerator holds a perfect 34°F. Great product that saved me an expensive service call!
This was a perfect replacement for the one I had. Just took out 4 screws from base to floor. Moved toilet away from wall. Unplugged old one. Fishes wire down wall. Plugged in. Put screws back in floor and now we don’t have worn out buttons in our RV any more. 1/2 hour job.
I was a little hesitant to mess with my HVAC, but I wanted to be able to use lower power generator for my home, so I decided to do it myself. I'm quite handy with electrical systems. The only issue I encountered, was that my HVAC had loop connector on the red contactor wires, instead of ferrule one that is the default on the supplied cables. I had to run to HD to get the right connector and to replace it on the supplied red cable. I believe most contactors use loop connectors, so it would be better for the manufacturer to provide it on the red wire, instead of ferrule. Another thing I had to do was to change the connector on the yellow wire to loop as well since I did not want to cut the compressor wire to change it to ferrule type that could plug into the Airgo in case I need to remove it in the future. It was easy to join two loop connectors with a screw. After doing these cable retrofits, everything went smoothly. The device was small enough to fit inside the electrical enclosure in the compressor unit. I verified significant startup current reduction from 84 to 34 amps. It might improve after a few learning cycles according to other folks. This will allow me to use smaller gas or solar generators with 8500W surge power or above. An added bonus is that the lights don't flicker and there is no "knock" sound anymore when the compressor starts up. This should also prolong the life of the compressor. Overall, I'm happy with this product. I included before and after photos.
After doing all of the troubleshooting to diagnose our issue, it came down to a failed component on the control board. Once this replacement part arrived, we replaced it in less than 15 minutes. Now the temp in the refrigerator is holding at 34 degrees.
Do your troubleshooting first. Plenty of how-tos online.
I'm genuinely pleased with the product quality. The module feels robust and all connections are secure. It provides smooth startups for my air conditioner just as described in the product details.

Let customers speak for us
from 4156 reviews
Product arrived after quite some time, overall well packaged and without defects, but took too long to arrive.
Looks great! Fits without any problems 👍🏼 Shipping took a bit long but I'm satisfied with the result. There was a holder for the Audi logo, but unfortunately I didn't figure out how to use it properly. So I simply tied the logo with cable ties. Therefore, I would definitely recommend it!
This Walbro 525lph fuel pump and kit is incredible. The E85 compatibility is fantastic, and it dropped right into my Hellcat. Huge improvement in fuel delivery and peace of mind. Perfect for high-performance builds.
This master solenoid kit completely revived my 4L60E transmission. The shifts are now crisp and firm, solving all the previous hesitation and slipping issues. A high-quality, essential fix.
This CarPlay upgrade module for my F-250 was a perfect plug-and-play solution. It works flawlessly with Sync 3, and now I have seamless Apple CarPlay. It makes the truck's tech feel completely modern. Fantastic upgrade!
This steering angle sensor was the exact match for my Pathfinder. Installation was simple and it cleared my dashboard warning lights immediately. Great OEM-quality replacement part!
This carburetor was the perfect fit for my Honda Twister. The bike starts easily and idles smoothly again, with much better throttle response. A fantastic fix that got my motorcycle running like new.
This center support bearing was a direct replacement for my Durango. The annoying vibration and noise are completely gone now. Quality part, easy install, and the ride is smooth again. Highly recommend.
This SRT grille emblem looks factory-perfect. The adhesive is strong and the finish matches the OEM gloss black perfectly. Installation took minutes and it completes the front end. Excellent quality.
This armrest cover was a perfect match for my Accord. It looks completely original and was very easy to install. The worn-out spot is now gone, making the interior look new again. Great value!
This center support bearing was a direct replacement for my Jeep's driveshaft. The annoying vibration and noise are completely gone now. Quality part, easy install, and the ride is smooth again. Highly recommend.
This portable gas leak detector is incredibly handy and works like a charm. It quickly pinpoints even small propane and natural gas leaks with clear visual alerts. Easy to use and provides real peace of mind for home safety. Excellent tool!
This AFM disabler is a must-have! Installed in seconds, completely eliminated the annoying cylinder deactivation. My truck now runs smoother, with more consistent power and no more annoying V4 mode. Very happy with this simple, effective fix.
This replacement control board fixed my pellet stove immediately! Easy to install and it runs perfectly now. Great value.
This RS-style honeycomb grille is a game-changer! Perfect fit for my A4, looks absolutely stunning. The gloss black finish is high quality and makes the car look so much more aggressive.