NEW STARTER FITS NISSAN / TOHATSU MARINE 25-30HP 1992-2003 410-44087 346-76010 Champoo
NEW STARTER FITS NISSAN / TOHATSU MARINE 25-30HP 1992-2003 410-44087 346-76010 Champoo
Couldn't load pickup availability
Fits Make/Model/Year:
Fit for Nissan Marine Outboard NS25 1992-2003 25HP 2-Stroke
Fit for Nissan Marine Outboard NS30 1992-2003 30HP 2-Stroke
Fit for Tohatsu Marine Outboard M25 1992-2005 25HP 2-Stroke
Fit for Tohatsu Marine Outboard M30 1992-2003 30HP 2-Stroke
Replacement Part Number:
S108-98
S108-98N
410-44087
346-76010-0
346-76010-0A0
346-76010-0M
Specifications:
Voltage: 12V
Number of Teeth: 9
Brush Type: Carbon
Torque(Nm): 4
Cycle Rating: 10000
Rotational Direction: Counter Clockwise (CCW)
Package includes:
1x New Starter
Note:
Compatibility only for reference,please check out the size & part numbers fits your motorcycle or not.
This is an aftermarket part, not original.
Customer Reviews
Fuel pump working great. It fit as it says it does still not sure why AutoZone was so much more expensive but the savings paid for the tow bill 🥰
It fits but swing in the opposite side of tank works great so far about a month in on use with no problems
Received the shipment a day earlier than estimated. The motor came securely boxed with protective foam. Installation was straightforward and solved my shifting issues immediately.
Perfect replacement at a great price. Love that it comes with starter and starter solenoid.
Direct fit and starter worked as it should👍🏽
Let customers speak for us
Installation was straightforward, and the precise fit to American specifications was noticeable. Transmission performance has significantly improved, with smoother shifts and no issues. Very satisfied with the product's quality and compatibility.
My truck was accelerating really slow, likely stuck in third. Replaced the transmission fluid, filter, gasket, and the four solenoids (just one of this specific item) and its running like brand new! Pretty straightforward replacement. There are a few videos on Youtube. Just have to be careful removing the two solenoids on the driver's side since they are spring loaded and will come flying off once you remove the clip holding them in place. Apply some pressure with your thumb or finger to keep it in place while removing the clip and then slowly pull them out so you don't lose the valves inside the transmission channel.
Chevy dealership wanted twice the price. This product works just as great and it comes like if I bought it from the Chevy dealership.
Worked great fit perfect
This product was exactly as described in the add.
The packaging was excellent. Lots of care went into this so nothing was damaged.
Great job 10/10 definitely recommend buying from them.
Packaged with care, arrived intact. Handles 30A load without issues. Great value for money!
Knowledgeable support team helped me compare OEM vs aftermarket options. The mirrors' aerodynamic shape matches the 929RR's lines beautifully. Top quality!
This big bore kit transformed my TRX400EX! The 89mm cylinder shows perfect machining marks and the piston rings seat beautifully. Noticeable power gain across all RPMs.
Installed in 10 minutes with basic tools. The gasket compresses evenly without tearing. Solved my intermittent charging problem completely.
This belt performs better than OEM on my Backcountry 850! Withstands deep powder riding without slipping. The reinforced fibers show no wear after 300 miles.
Safety Upgrade with a Super Easy Install. We always use the appropriate hand signals when riding in groups of 2 or more, but the added brake lights as well as turn signals are much appreciated by those riding behind me as I lead our groups more than most. I read the negatives comments about the adhesive, so I peeled the adhesive backing off, heated it with my heat gun and even heated the saddle bag a bit before mounting the lights and although it's early, it's been nasty hot, and the adhesive seems to be holding just fine!
The colors are a perfect match for the factory lighting on my bike!
Plug and play as advertised. This thing is awesome for the price!! Bike fired right up. No tuning or adjusting needed. I am very happy with it!!
Stator is well made and has put out consistent voltage.
Excellent parts, at a very good price
Installed flawlessly in my modified Charger. The 525LPH rating is accurate with consistent pressure under WOT. Anodized fittings resist corrosion better than stock components.