Grease Trailer Hub and Drum Assembly for 5.2K-7K Axles-12"-8 on 6.5-Pre-Greased
Grease Trailer Hub and Drum Assembly for 5.2K-7K Axles-12"-8 on 6.5-Pre-Greased
Features:
Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
Compatible with electric and hydraulic drum brakes
Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy
Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
Sturdy iron construction
Zinc-enriched paint on drum adds durability
Zinc-finished bolts resist corrosion
Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings
Lithium complex, multipurpose grease keeps bearings lubricated
Bearings, races, grease seal, grease cap, and lug nuts are included
QAI and CSA certified
Specification:
Application: 5,200-lb, 6,000-lb, and 7,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #42 spindles
Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
Actual drum dimensions: 12-15/16" diameter x 2-3/8" wide
Works with 12" brake assembly
Bolt pattern: 8 on 6-1/2"
Wheel studs: 1/2" diameter x 1-5/16" long
Grease cap flange diameter: 2.72"
Weight capacity: 3,500 lbs
Bearing, Race, and Seal Information
Bearings (included)
Inner bearing: 25580 (1.75" inner diameter)
Outer bearing: 14125A (1.25" inner diameter)
Races (included)
Inner race: 25520
Outer race: 14276
Grease seal (included): GS2250DL
Inner diameter: 2.25"
Outer diameter: 3.376"
Thoroughly Tested for Safety
This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This assembly underwent extensive testing to measure stopping distances when braking. This assembly has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.
E-Z Lube and Easy Grease-Compatible Assembly for Simple Lubrication
The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
Shipping Information:
Free Quick Shipping to USA.
Estimated Time of Arrival: within 2-5 working days.
Share
Let customers speak for us
from 1005 reviewsGood running carburetor. This carburetor runs very well, I just adjusted the choke each morning for a few days to get the cold start choke setting where I wanted it then adjusted the air fuel screws and it starts and runs really well i'm impressed for the price.
Easy install and fit perfectly. Good pressure for the washer fluid.
Great Service, really realiable.
Yes, will install it tomorrow
Just good
no more problem with the engine light thank you so much
The original one is hard to find, this one is a decent replacement.
This is exactly what I was looking for. I got some drag bars and I needed to raise it up one inch to clear the top of the front forks.
These work perfect, no issues and they look good in black.
Sure enough perfect match went rite in place of the old one. Put the bike back together and soon as it got fuel she fired up. First time in 8 years. Having an issue with getting rpm out of it without stalling but I will mess with it.
Clutch on bike is seized up so I can’t ride to test out but it so far has done what I want and that’s running bike to work with. Can’t fully blame the carb due to other un known issues with old bike but time will tell. So far I’m thrilled this carb got the bike running rite out of the box
Fix my error code problem
Got my carb, 2 days later them I expect but it looks great
Looks good
Got it in 4 days.
I ordered these GE water filters and am extremely happy with my purchase. They are GE brand and the cost was much lower than my local supplier. Shipping was free and they arrived well packed and quickly. I was so happy with the purchase that I recommended it to several friends who also purchased them. I will definitely order again when needed.
Definitely recommend if you have a the code and need it gone for inspection. I run a repair shop, and this is my second time buying here. Really impressed! Planning to order more next time—hope you can give me a good discount.