Electric Trailer Brake Kit-Self-Adjusting-12"-Left/Right Hand Assemblies 5.2K-7K
Electric Trailer Brake Kit-Self-Adjusting-12"-Left/Right Hand Assemblies 5.2K-7K
Features:
Electric brakes are easier to install and offer more user control than hydraulic brakes
Require only an electric brake controller - no actuator or hydraulic lines necessary
Automotive-grade friction material is molded to brake shoes
Pads are fully bonded - not riveted - to shoes for long life and more braking torque
Less chance of cracking and crumbling that can lead to mechanical lockup, thanks to tapered edge and circular grinding
Self-adjusting brakes do not require periodic manual adjustment like standard brakes
Fine-tooth brake adjustment gears allow for a more precise setting
E-coated backing plates resist wear and corrosion
Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes
Left-hand (driver's-side) brake assembly and right-hand (passenger's-side) brake assembly included
QAI and CSA certified
Specification:
Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO
Dimensions: 12" diameter x 2" wide
Mounting flange bolt pattern: 5 bolt
Wheel size: 14-1/2", 15", 16", and 16-1/2"
Axle rating: 5,200 lbs, 6,000 lbs, and 7,000 lbs
Self-Adjusting Brakes Don't Require Routine Adjustment
Standard electric brake assemblies require manual adjustment of the brake shoes over time to provide longer-lasting and more efficient braking performance. With self-adjusting brakes, the brake shoes are always properly aligned, so there's no need to manually adjust the brakes after the initial adjustment. As a result, you get optimum performance without having to take the time to continually perform this type of maintenance.
Thoroughly Tested for Safety
These brake assemblies meet the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. These brake assemblies underwent extensive testing to measure stopping distances when braking. These brakes have also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.
Automotive-Grade Friction Material
Each shoe on these brake assemblies is lined with automotive-grade friction material for improved stopping performance and longevity. The friction material is fully bonded onto the surface of the brake shoe. This lining is custom-molded for a perfect fit. The edges are tapered to ensure long-lasting performance. This taper, along with the circular grinding that the lining undergoes, helps to prevent cracking and crumbling. This durability helps to prevent mechanical lockup, which can occur when brake shoes are excessively worn or broken.
The friction material is also SAE-N certified, which means that it is an environmentally safe product that complies with California and Washington regulations regarding the composition of brake pads. As a result, this material not only provides high-performance braking that can endure the test of time, but it is also environmentally friendly and safe for use throughout the United States and Canada.
Shipping Information:
Free Quick Shipping to USA.
Estimated Time of Arrival: within 2-5 working days.
Share
Let customers speak for us
from 1005 reviewsGood running carburetor. This carburetor runs very well, I just adjusted the choke each morning for a few days to get the cold start choke setting where I wanted it then adjusted the air fuel screws and it starts and runs really well i'm impressed for the price.
Easy install and fit perfectly. Good pressure for the washer fluid.
Great Service, really realiable.
Yes, will install it tomorrow
Just good
no more problem with the engine light thank you so much
The original one is hard to find, this one is a decent replacement.
This is exactly what I was looking for. I got some drag bars and I needed to raise it up one inch to clear the top of the front forks.
These work perfect, no issues and they look good in black.
Sure enough perfect match went rite in place of the old one. Put the bike back together and soon as it got fuel she fired up. First time in 8 years. Having an issue with getting rpm out of it without stalling but I will mess with it.
Clutch on bike is seized up so I can’t ride to test out but it so far has done what I want and that’s running bike to work with. Can’t fully blame the carb due to other un known issues with old bike but time will tell. So far I’m thrilled this carb got the bike running rite out of the box
Fix my error code problem
Got my carb, 2 days later them I expect but it looks great
Looks good
Got it in 4 days.
I ordered these GE water filters and am extremely happy with my purchase. They are GE brand and the cost was much lower than my local supplier. Shipping was free and they arrived well packed and quickly. I was so happy with the purchase that I recommended it to several friends who also purchased them. I will definitely order again when needed.
Definitely recommend if you have a the code and need it gone for inspection. I run a repair shop, and this is my second time buying here. Really impressed! Planning to order more next time—hope you can give me a good discount.