EGR Valve Block Plate for VW Seat Skoda 1.2L 1.6L TDi CR Golf Polo A1 A3 Touran
EGR Valve Block Plate for VW Seat Skoda 1.2L 1.6L TDi CR Golf Polo A1 A3 Touran
Couldn't load pickup availability
This is a laser cut blanking plate, made from 1.5mm stainless steel. It has been rumbled to make it smooth and give it an abraded surface that gives a better seal, plus removes all sharp edges (so no cutting of the fingers). It is slotted to make it easy to fit, and it is easy to get at.
It gives a cleaner pickup at lower revs because the exhaust gas being recycled. It will put the engine management light on.
THIS FITS: 1.2 &1.6 TDi CR (Common Rail) engines as pictured in VW, Audi, Seat, Skoda. If you need help please ask along with the 4 letter engine code I.E. CAYC CAYA ECT
Will not fit Late Euro5 and the Euro6 engine as they have the EGR systems internally, so can't be blocked with a plate.
Other Benefits of blocking EGR:
1. Cleaner engine oil helping to give longer engine life.
2. Turbo spooling up quicker, and a t lower revs
3. Helps prevents soot build up in intake manifold, and valve's, which will lower the power
4. Smoother drive and quite often better economy
5. Will help to pass the MOT, as it is tested on the smoke output
Package included:
1x Plate
Shipping Information:
Free Quick Shipping.
Estimated Time of Arrival: within 3-6 working days.
Share












Let customers speak for us
from 1035 reviews
Perfect fit. Came with everything I needed and on time to.

Works as it should.

Strong power

item as described, prompt shipping, great communication, thank you.

As good as expectation, perform well.

Good running carburetor. This carburetor runs very well, I just adjusted the choke each morning for a few days to get the cold start choke setting where I wanted it then adjusted the air fuel screws and it starts and runs really well i'm impressed for the price.

Easy install and fit perfectly. Good pressure for the washer fluid.

Great Service, really realiable.

Yes, will install it tomorrow

Just good

no more problem with the engine light thank you so much

The original one is hard to find, this one is a decent replacement.

This is exactly what I was looking for. I got some drag bars and I needed to raise it up one inch to clear the top of the front forks.
These work perfect, no issues and they look good in black.

Sure enough perfect match went rite in place of the old one. Put the bike back together and soon as it got fuel she fired up. First time in 8 years. Having an issue with getting rpm out of it without stalling but I will mess with it.
Clutch on bike is seized up so I can’t ride to test out but it so far has done what I want and that’s running bike to work with. Can’t fully blame the carb due to other un known issues with old bike but time will tell. So far I’m thrilled this carb got the bike running rite out of the box

Fix my error code problem