2011-2012 BMW 1 Series E82 E88-135i N55 Engine Exhaust Downpipe
2011-2012 BMW 1 Series E82 E88-135i N55 Engine Exhaust Downpipe
Couldn't load pickup availability
Fitment:
2011-2012 BMW 1 Series E82 E88-135i N55 Engine
2011-2012 BMW 3 Series E90 E91 E92 E93-335i N55 Engine
Package including:
1x Pipe
2x Gaskets
5x Screws
Feature:
The BMW 335i downpipe is machined from T304 high-grade stainless steel and are tig welded in house
The decat is fabricated in the UK and the flanges are laser cut between 10-12mm
Sharper throttle response due to faster spool of the turbo
Noticeable power gains and a much more aggressive exhaust note which sounds truly amazing
Produces lower temperatures and less exhaust backpressure due to the relief of the turbocharger. Also, the cylinder charge is increased
There is also a substantial weight saving in comparison to the factory catalytic converter
Mandrel-bent for better gas flow and maximum internal size to ensure ultimate performance without the loss of mid-range torque.
Share
Unleashed my M235i's true roar! This downpipe bolts on seamlessly with OEM-grade fit. 304 stainless shines through 15k miles of backroad blasts—CEL-free performance gains you feel instantly. Outperforms $1k+ brands at half price!
Great fit
Test pipes solid but doesn’t line up 100%, need to do some modification on it.

Great quality for the money. Welds are great and packaging was great. Shipping caused the outer box to be quite damaged but the product was perfect. I would order again in a heartbeat! No brainer!!
Looks nice, decent quality, and easy install






Let customers speak for us
from 1811 reviews
Excellent resolution for the Check engine Light.

Installation was a breeze, thanks to the kit's comprehensive design and clear instructions.

The new ignition module was installed without major issues, though the spark plug wires were uniform in length, unlike the original OEM part which had one longer wire to reach the farther spark plug. With this replacement, the wire barely made it to the distant spark plug, while the coil for the closer one had to be looped over the engine. Another challenge was connecting the reverse plug and another connector the module's male terminals were round, while the snowmobile's connectors had square holes. This made the connection difficult, requiring some wiggling to fit the round pins into the rectangular slots. Despite these minor fitment issues, the snowmobile started on the first pull and is running smoothly with the new module. Hopefully, it will prove durable over time.

These Magneto Stator Rectifier Gasket Set totally exceeded my expectation. They provides a reliable power upgrade to my bike's electrical system. The only problem is it takes too long to get it. But anyway, it works great.

Fit well

This product works well. When I installed this eliminator, the B2 catalytic converter for my 2016 3.7L Ford PIU was priced at $1,400. I had previously installed the same part on my 1998 4.0L Jeep Wrangler, and it has been performing great. Only time will tell if it holds up long-term, but I hope I can find replacement cartridges if needed. The delivery was delayed by two days due to the UPS-to-USPS handoff.

Definitely would buy again if ever needed. Plug and play, no programming needed.

They shake a little less than the stock, the look better and less bug antenna like. Definitely feel like I would buy these again. My picture shows the stock mirror on the right VS the new install on the left.

Great handles easy install

I'm so glad I ordered this replacement screen! The dealership quoted me $600 to 'fix' it, claiming the radio needed replacement, Even though everything worked fine except the display. I knew that wasn’t the issue, and this affordable solution proved it. Works perfectly now!

Perfect replacement for my Harley road king and saved a couple hundred dollars, just hope it last

he performance of all 8 coils has worked well so far without no misfire. So, I would recommend them to others to try out also.

Get right of that P0420 CEL code

I tested the product when it arrived, but noticed one side was loose. I managed to stop and remove the wing, though I lost the E-clip and spring. The seller was responsive and sent replacement parts a new pin, E-clips, and spring. I’m happy to report that I just completed a 12-day, 2,700-mile trip, and they performed flawlessly. On hot days, they helped direct airflow toward me, and they deflect wind as well as (if not better than) the original stock parts, likely because they’re taller.

There is nothing in terms of customer support so you're on your own in terms of figuring it out. The throttle linkage and the case breather for example are a custom fit. The upper throttle link has a threaded fit, probably for Kawasaki (not sure) that is clearly specific to one very specific linkage set. The lower link is an open c and much easier to work with.
I wound up making a custom bung to make the upper linkage work. It was annoying, but overall not bad.
Beats spending $400+ on a stock carb for a 25 year old bike.